Customizing can be a fun, but dangerous hobby. These tutorials are contributed by other customizers. Some of the things recommended in the tutorials may be dangerous, such as the use of boiling water or sharp objects. You shouldn't attempt anything mentioned without adult permission and supervision. Figure Realm and/or the authors of the tutorials are not liable for any injuries or damages occurring from any attempt to follow suggestions in these tutorials.
Hmmm yeah I don't know if the torso of the figures are made the same. Batman has no waste movement at all so I'm thinking the torso is sculpted all in one piece, as if the belt was just glued on? If so, the belt cutting method could work I'm thinking. Thanks for your time
I'm Max I'm 27 years old long time figure fan and new member on here. I'm wanting to just lower the belt a tad on the Batman and son Dc Direct figure. Will this method work?
If you want to lower the belt, and it's built the same way, I imagine you would remove it like shown here, cut out/widen the center hole so you can physically lower the belt, and then glue it directly to the figure.
Please wait...
If you want to lower the belt, and it's built the same way, I imagine you would remove it like shown here, cut out/widen the center hole so you can physically lower the belt, and then glue it directly to the figure.