The Hellfire club goons are very difficult to get hold of now. I got two when released but that was all I could get. So I made my own. Used the original to take a clay mould of the mask. Peeled off the citizen v mask with pliers. Removed cape and belt. To make the mask I applied a small piece of clay to the citizen v head then press it into the previous mould I made. This worked well and pushed the clay into the cavities left by the citizen v mask socket. Used a small flat screwdriver to press in the eyes and mouth a little, trimmed the excess clay and left to set. Masked off the uniform design with tape and painted with red acrylic, gloves and boots too to match. This left pretty clean lines.