Continuing with the forgotten series this is my version of Faker!!! I engraved the chest plate (it took a looooong time to do this part), and continuing with a full paint job including removing the...[See More]

Removed the skirt, cape, Dremeled down the knee pads and the gloves, filled in the holes left from the cape,added the power ring, and did a full custom paint job with mix colors including a hand...[See More]

This is from a series of older custom that I forgot to post when I changed computers. It is a repaint, (and upgrade of the head) to create a figure to display next to the silver Darth Vader TRU...[See More]

I took it entirely apart, removed the missile launch mechanism, side panels, engine cover, rear and top fins, wheel hubs, and canopy. I replaced the side panels with solid plastic sheets, build new...[See More]

I took the head off the figure, repainted the eyes and hair, I sculpted the tiara with Apoxy and styrene, and painted it with metallic pink, and gold. Next I stripped off the original paint and drew...[See More]

I started by taking the figure apart, and repainting the body in white, next I stripped off the original paint from the armor, and re-sculpted the chest piece, sculpted the tiara with Apoxy and...[See More]

Cyclops is a robot created by Man-At-arms using the same technology on Triclops triple visor weapon. I removed the triple visor, armor, left hand, knee and belt accents, also sanded off the...[See More]

Started by trimming the cape, skirt, and boots. Next I took the head off, and I dremel off some of the hair and shoulders, sculpted the stripes above the chest symbol, and added the power ring. The...[See More]

The base figure was a ML Shocker, I filled in the openings for the missiles in both hands, sculpted the yellow lantern symbol on his chest, added the power ring to his right fist, and finally...[See More]

I removed the shoulder pads, head from the Iron Man figure and the head from the Batman filled in the bottom part of the mask and the power cell on the Iron Man figure, painted the figure in black...[See More]

It is a full custom repaint, with a custom Autobot logo, dry brushed in aluminum, and specialty metallic colors. It was a lot of fun making this guy!!...[See More]

I took the Batmobile entirely apart, I removed the cockpit and the disc launching mechanism, and filled in the gaps with apoxy, sanded it down completely and proceed to a full paint job including the...[See More]

Same Recipe as Black Phoenix using Tamiya Yellow instead of smoke,the tips of the Nebula Chain are made out of plastic and a glass bead painted in chrome and clear yellow. I made the chain long...[See More]

I stripped off the paint on the entire armor, base coated it in aluminum/chrome, applied three coats of Tamiya clear smoke, and top coated it with high gloss....[See More]

He-man has disappear, prince Adam has been captured by Skeletor, Duncan knows the connection and plans a rescue mission with the help of the masters of the universe. However, what he doesn't know is...[See More]

I made this custom a few months back, I just forgot to post it due to problems with my computer. Basically, I removed the "D" symbol and sculpted the white lantern one, the rest was a repaint using...[See More]

I removed the hair and sculpted a new face and hair with Apoxy. The armor was entirely built from scratch and dry brushed in gold, the belt was made out of cord. Now, for the big hand, I used a DCUC...[See More]

I started by sanding down all the joints to prevent paint rub, the next step was to base coat the entire figure in white and glow in the dark paint, the third step was to coat it with translucent...[See More]

I started by removing the silly collar, and sculpting the Eclipso logo on his chest, the Black Lantern logo on his belt, and painted the entire figure in black and repainted all the details with...[See More]

Removed the cape, carved the Red lantern logo on the chest, I used glow in the dark paint to outline the chest logo and filled it in with black, mixed some paints to created the shade of red color...[See More]

I removed the belt and filled in the gap with Apoxy, hand carved the "Batman" logo on the front of the waist. I drilled tow holes on the back of the figure glued, and covered with Apoxy a couple of...[See More]

First step was to remove the belt, added cuffs and the ring, made out of a small piece of plastic rod. After that I applied two coats of specialty white paint to the entire figure. Carving the symbol...[See More]

Head: Ripclaw Body: Ripclaw Right Arm: SuperPatriot Left Leg: SuperPatriot Cyborg eye: Red jewel Started by disassembling both figures and exchanging the right arm and left leg to create the robotic...[See More]

I started by sanding down all the joints to protect the paint from rubbing off, then I painted the entire body with a specialty black paint, painted the spiders on the chest and back in red, and the...[See More]

The first step was to remove the belt spikes and buckle, next, I sculpted a new belt buckle and carved the Bat symbol on it, then I mixed two different shades of red plus aluminum for the gloves...[See More]

The same recipe that my Tumbler, Full camouflage paint job, and details in Chrome, Black and Copper....[See More]

Going back in time, I finished this Batmobile a few months back and just now was able to post it, Enjoy!!!! I took it entirely apart, and did a full camouflage paint job to recreate the original...[See More]

There was a lot of work involved in this figure: First, I removed the tail and filled in the hole with Apoxy, the next step was to create the scratches and the bullet holes using my Dremel tool....[See More]

I started by removing the belt and filled in the gap with Apoxy, removed the spikes from the gloves and added new ones made out of plastic. The next step was to cut the pieces for the new belt from...[See More]

I started by sculpting the horns over the existing ones, I gave him a light wash of black on the armor, and dry brushed a mix of blue and gray paint. Then carved the shoulder pads, added plastic...[See More]